Future Techno Designs Private Limited is a Singapore-based company with activities covering a broad spectrum of ASIC, SoC and System level designs in wireless. multimedia and other domains. As a key technology hub developing future generation products with world-class output, the group has expertise in all related fields like Analog, Digital, Mixed Singnal, RF Designs & Embedded Systems leading to complete product delivery capability. With a number of Design and Development Centers operating at Bangalore, Singapore, USA and Australia for quite some years, FTD Group is poised for expansion in other parts of the country and the world at a fast pace.

We are now setting up dedicated design centers at Hyderabad and Bangalore as a Joint Venture with a renowned Japanese Semiconductor Major. To join us in this fast paced growth and challenging environment, we invite expertise in the below mentioned domains.

Mixed Signal Design Center (Hyderabad)
Emphasis on High Speed Digital and Mixed Singnal SoC's operating at 500 MHz to 3 GHz clock; Digital PHY Logic design, Analog blocks like PLL. DLL ADC, DAC, REgulator and systems monitoring circuits, on 0.18 um, 130 nm and 90 nm CMOS process technologies for cell phones, digital home eletrionics and networking solutions.

Project Manger Job Code: PM
Experience: 10+ years

Skill Set: High speed communication interface ASIC design exepreince in DSM process technologies. Good understanding of Analog/Digital I CTechnologies; Mixed Sigma; SoC Arcjotectire amd Omtegratopm amd CAD flow; Exposure to multiple foundry processe.

Successful completion of projects till tape out and silicon test experience is highly desirable. Must have grip on complete development cycle.

People/Project Management, effective project planning and optimum resource utilization. Excellent communication skills and demonstrated leadership.

Job description: Provides overall direction for the team; Manages all activities related to the project and team; Linking up with the offshore customer's managers.

Senior Design Engineers
Experience: 4 + years

Skill Set:
Analog: Job Code: SE-A
Hands - on experience high speed/low voltage circuit design; PLL/SERDES; Exposure to DSM process technologies; Mixed Singnal ASIC/SoC integration and CAD flow; Exposure to multiple foundry processes.

Digital: Job Code: SE-D
Architecture, RTL, Synthesis, timing closure and mixed signal simulation and back-end exposure. Domain experience in HDMI/DVI, PHY.

Team leadership skills are highly desirable for Senior Engineers. Must be capable of coordinating all technical activities.

Design Engineers
Experience: 2+ years

Skill Set:
Analog: Job Code: DE-A
Hands-on experience in design/analysis/testing sub-blocks of Data Converters; PLLs and Regulators with exposure to DSM process technologies; CAD flow; Exposure to multiple foundry processes. Equally equi9pped to handle circuit design and layout.

Digital: Job Code: DE-D
Experience in Verilog/VHDL RTL coding/vertification essential. Synthesis/timing closure and mixed signal simulation and back-end exposure desirable.

Layout: Job Code : DE-L
Experience in full custom IC flow on Cadence and P&R flow, and block/chip level physical verification essential; Exposure to different processes and foundries/tools (Calibre, Cadence) highly desirable. Equally equipped to handle custom layout and autorouting- scripting languages such as SKILL, Pearl are desirable.

EDA/CAD Engineers Job Code: CAD
Experience: 3+ years

Skill Set: Experience in configuring/setting up/usage of EDA tools as Cadence Virtuoso Composer, NC-Verilog, Design Compiler, H- Spice, H-Sim, and Calibre is essential. Design database management, system support.

Active participation in team activites, Optimum resource utilization, license management.

Junior Design Engineers Job Code: JDE
Experience: Around 1 year (B.Tech)

Skill Set; Familiar with CMOS circuit design, RTL coding; Exposure to simulation tools; Good knowledge of Layout techniques/ issues; Exposrue to 0.18 um technology preferable. Capable of Simulation/ testing/ characterization of analog/ digital sub-blocks.

Quick learning, problem - solving capabilities and effective communication. Skills.

Qualification: B.E/B.Tech (Electronics/communication) essential for all design positions.

M.E/M.Tech (Microelectronics/VLSI/ASIC/Solid Circuits) preferable for all design positions and are eligible for relaxation of 1 years experience.

PhD in a related field would be the most appropriate proposition for this high-end design assignment.

Diploma/B.Sc (Electronics) wtih 2 years of additional expereince aceptable for layout positions.

All candidates must have First Class/Distinction in Academics. good analytical, communication skills and problem-solving aptitude.

Please email your resume with the respective Job Code in the subject line. Click here to Apply!

Power IC Design Center (Hyderabad)
Emphasis on Power management/conversion circuits like LDO, DC-DC Converter using CMOS and BiCMOS porcess technologies for portable/radio equipment, battery powered systems and other communication applications.

Project Manager Job Code: PM
Experience: 10 + years

Skill Set: IC design and layout experience in CMOS and BiCMOS process technologies. Good understanding of Analog Circuits and Technologies; CAD flow; Exposure to multiple foundry processes.

Successful completion of projects till tape out and silicon test experience is highly desirable. Must have grip on complete development cycle.

People/Project Management; Effective project planning and Optimum resource utilization. Excellent communication skills and demonstrated leadership.

Job description: Provides overall direction for the team; Manages al activities related to the project and team; Linking up with the offshore customer's managers.

Senior Design Engineers
Expereince: 4+ years

Skill Set:
Analog: Job Code: SE-A
Hands -on experience in Analog Circuit design, Power IC's - DC-DC converters, PWM, Charg Pump, Regulators, Op-amp, BGR and general analog sub-blocks. Power management/ Conversion - design exposure on CMOS/BICMOS processes; CAD flow; Exposure to multiple foundry processes.

Team leadership skills are highly desirable for Senior Engineers. Must be capable of coordinating all technical activities.

Design Engineers
Experience: 2 + years

Skill Set:
Analog: Job Code: DE-A
Hands-on experience in design/ analysis/testing sub-blocks of Power IC's - DC-Dc converters, PWM, Charge Pump, Regulators, Op-amp, BGR and general analog sub-blocks. Good discrete/board level circuit engineering experience, would also be considered if found exceptionally sound in design/testing.

Layout Job Code:DE-L
Experience in full custom IC flow on Cadence, and block/chip level physical verification essential. Exposure to different processes and foundries/ tools highly desirable.

Junior Design Engineers Job Code: JDE
Experience: Around 1 year (B.Tech)

Skill Set: Familiar with CMOS circuit design; Exposure to simulation tools. Good knowledge of Layout techniques/ issues; Exposure to 0.18um technology preferable. Capable of Simulation/ Testing/ Characterization of analog/ digital sub-blocks.

Quick learning, problem-solving capabilities and effective communication skills.

Qualification: B.E/B.Tech (Electronics/Instrumentation) essential for all design positions.

M.E/M.Tech (Microelectronics/Power Electronics/ Solid State Circuits) preferable for all design positions - eligible for relaxation of 1 year experience.

PhD in a related field would be the most appropriate proposition for this high-end design assignment.

Diploma/B.Sc (Electronics) with 2 years of additional experience aceptable for layout positions.

All candidates must have First Class/Distinction in Academics. good analytical, communication skills and problem-solving aptitude.

Please email your resume with the respective Job Code in the subject line. Click here to Apply!

Interface & Control IC Design Center (Bangalore)
Emphasis on controllers, driver circuits, protection/shut down circuits, ADC/DAC for Motors, LED panels and disk drives using BiCMOS, HV-CMOS and Bipolar process technologies for Home Appliances, Automotive and Industrial Automation applications.

Project Manager Job Code: PM
Experience: 10 + years

Skill Set: Custom IC design and layout experience in CMOS and BiCMOS, HV-CMOS and Bipolar process technologies. Good understanding of Analog IC Technologies; CAD flow; Exposure to multiple foundry processes.

Successful completion of projects till tape out and silicon test experience is highly desirable. Must have grip on complete development cycle.

People/Project Management, Effective project planning and Optimum resource utilization. Excellent communication skills and demonstrated leadership.

Job description: Provides overall direction for the team; Manages all activities related to the project and team; Linking up with the off-shore customer's managers.

Senior Design Engineers
Expereince: 4+ years

Skill Set:
Analog: Job Code: SE-A
Hands-on experience in Analog Circuit design, Motor Controllers, Driver Circuits, Protection/ shut down circuits, LED drivers panels, Regulators and general analog sub-blocks. Exposure in CMOS, BICMOS, Bipolar and HV-CMOS process and handling high voltage/current issues. CAD flow, exposure to multiple foundry processes.

Team leadership skills are highly desirable for Senior Engineers. Must be capable of coordinating all technical activities.

Design Engineers
Experience: 2 + years

Skill Set:
Analog: Job Code: DE-A
Hands-on experience in design/ analysis/testing sub-blocks of Motor Controllers, Driver Circuits, Protection/ shut down circuits, LED drivers panels, PWM, Regulators. Op-amp, BGR and general analog sub-blocks. Good discrete/board level circuit engineering experience, would also be considered if found exceptionally sound in design/testing. CAD flow, exposure to multiple foundry processes.

Layout Job Code:DE-L
Experience in full custom IC flow on Cadence, and block/chip level physical verification essential. Exposure to different processes and foundries/ tools highly desirable.

Junior Design Engineers Job Code: JDE
Experience: Around 1 year (B.Tech)

Skill Set: Familiar with circuit design, exposure to simulation tools. Good knowledge of Layout techniques/ issues; Capable of Simulation/ Testing/ Characterization of analog/ digital sub-blocks.

Quick learning, problem-solving capabilities and effective communication skills.

Qualification: B.E/B.Tech (Electronics/Instrumentation) essential for all design positions.

M.E/M.Tech (Microelectronics/Power & Industrial Electronics/ Solid State Circuits) preferable for all design positions - eligible for relaxation of 1 year experience.

PhD in a related field would be the most appropriate proposition for this high-end design assignment.

Diploma/B.Sc (Electronics) with 2 years of additional experience aceptable for layout positions.

All candidates must have First Class/Distinction in Academics. Good analytical, communication skills and problem-solving aptitude.

Please email your resume with the respective Job Code in the subject line. Click here to Apply!